Designing a PCB > Parts > Creating Parts > DEX-AI > Pinout Accuracy and Verification

WARNING — Pinout Accuracy and Verification

IMPORTANT: The pinout information provided is for reference purposes only and must not be assumed to be complete, accurate, or suitable for manufacturing without independent verification.

Although every effort has been made to provide correct pin numbers, signal names, functions, and descriptions, the information may contain errors, omissions, or inconsistencies. Different manufacturers, device revisions, and package variants may use different pin assignments.

Before using this information in AutoTRAX DEX or any other electronic design software, users must:

1.Verify every pin number and signal assignment against the latest official manufacturer's datasheet.

2.Confirm that the selected package matches the exact manufacturer part number and package variant.

3.Check all power, ground, control, multiplexed, reserved, and no-connect pins.

4.Independently verify the PCB footprint, pin numbering, pad dimensions, and mechanical specifications.

5.Perform appropriate schematic, electrical, and PCB design verification before manufacturing.

DISCLAIMER: This information is supplied "AS IS" without any warranty of accuracy, completeness, or fitness for a particular purpose. The user is responsible for verifying all technical details before incorporating them into a design.

Incorrect pin assignments can result in component damage, PCB manufacturing errors, equipment failure, or safety hazards.