<< Click to Display Table of Contents >> Navigation:  Designing a PCB with DEX > Parts > PCB Device Types > Device Package Types > PCB Device Packages > Integrated Circuits > LCC - Leaded Chip Carrier

The Leaded Chip Carrier (LCC) is a type of surface-mount packaging used for integrated circuits (ICs). LCCs are notable for their 'J'-shaped leads on the four sides of the package, which allow for surface mounting on printed circuit boards (PCBs). These packages were among the early solutions for higher lead count and compact IC packaging compared to previous dual in-line packages (DIPs).

Here are some characteristics and considerations regarding LCCs:

Design and Structure

•Lead Format: The LCC has leads on all four sides, with the 'J'-shaped format allowing them to be soldered directly to the surface of the PCB, without the need for through-holes. This feature significantly contributes to its compactness and efficiency on the board layout.

•Material: LCCs can be made from ceramic or plastic, although ceramic is often preferred for its superior thermal and electrical properties.

•Seating Plane: The leads have a seating plane, allowing the package to sit flat on the PCB, which is crucial for the reliability of soldered connections and mechanical stability.

Advantages

•High Density: LCCs permit a higher number of pins than traditional DIPs, supporting more complex and higher-performance ICs in a smaller area.

•Improved Performance: The short lead length allows for faster signal transmission with less noise, which is particularly beneficial for high-frequency applications.

•Thermal Management: Particularly with ceramic versions, LCCs offer good thermal properties, helping to dissipate heat effectively during operation.

Common Applications

•Telecommunications: LCCs are used in communication devices and systems due to their high-speed performance and reliability.

•Military and Aerospace: The robustness, reliability, and long service life of ceramic LCCs make them suitable for military and aerospace applications that require components that can withstand extreme conditions.

•Medical Electronics: Their reliability and compactness make them useful in certain medical devices, especially those requiring dependable performance over long periods.

Manufacturing and Handling Considerations

•Soldering: LCCs are usually attached to PCBs using reflow soldering. The process must be carefully controlled to prevent issues such as tombstoning, where one end of the component lifts from the PCB during soldering.

•Inspection: Given that the leads are underneath the package, post-soldering inspection can require X-ray equipment to ensure the quality of solder joints.

•Sensitivity to Environmental Conditions: While ceramic LCCs are quite robust, plastic LCCs can be sensitive to moisture and temperature extremes, requiring careful storage and handling.

Despite newer packaging technologies that continue to emerge, LCCs remain in use for various applications due to their proven track record of reliability, particularly in settings that require robust performance under harsh conditions.