To add a copper pour areas click on one of the 3 buttons
in the Add→Pour ribbon button group.
There are 3 basic shape type.
1.Rectangular
2.Elliptical/Circular
3.Polygonal.
|
<< Click to Display Table of Contents >> Navigation: Designing a PCB with DEX > Projects > The PCB > Routing > Copper Pour Regions > Adding Copper Pour Regions |
To add a copper pour areas click on one of the 3 buttons in the Add→Pour ribbon button group.
There are 3 basic shape type.
1.Rectangular
2.Elliptical/Circular
3.Polygonal.