<< Click to Display Table of Contents >> Navigation:  Designing a PCB with DEX > Parts > Parametric Parts > Type Selection > Disc

A two-pin disc package typically refers to a type of packaging used for certain electronic components, like ceramic disc capacitors or certain types of diodes or transistors. The package essentially includes the disc-shaped component body with two leads or terminals extending from it for electrical connection.

Here are some characteristics of a 2-pin disc package:

•Design: The main body of the component is disc-shaped, usually made of a ceramic material for capacitors. Two metal leads extend from opposite ends of the disc, forming the electrical connections to the circuit.

•Installation: These components can be surface-mounted or through-hole mounted depending on the design of the leads and the printed circuit board (PCB). For through-hole mounting, the leads are inserted into drilled holes on the PCB and soldered into place.

•Package Types: The most common type of 2-pin disc package is the ceramic disc capacitor. However, some types of transistors or diodes also come in a similar package.

•Applications: Two-pin disc packages are used in a variety of electronic devices and circuits. Ceramic disc capacitors are used for a variety of purposes, including bypass, coupling, filtering, and timing applications.

As with all electronic components, these need to be properly incorporated into the circuit design, correctly installed on the PCB, and thoroughly tested to ensure reliable operation.