A two-pin SMT (Surface Mount Technology) chip package is a type of package that is designed to be mounted on the surface of a printed circuit board (PCB), rather than being inserted through holes drilled in the board. This type of package is used for components such as resistors, capacitors, diodes, inductors, and certain types of integrated circuits.
Here are some characteristics of a 2-pin SMT chip package:
•Design: The package has two terminals or leads for electrical connection. These terminals are typically located on opposite ends of the package.
•Installation: The chip is placed on top of the PCB, and the leads are soldered directly to the board's surface. This is in contrast to through-hole components, which require holes to be drilled into the PCB for mounting.
•Package Types: Common types of 2-pin SMT chip packages include chip resistors and capacitors (typically in 0402, 0603, 0805, 1206 sizes, etc., where the numbers refer to dimensions in hundredths of inches), small signal diodes, LEDs, and various types of transistors.
•Applications: Two-pin SMT chip packages are used in virtually all modern electronic devices due to their small size, low cost, and ease of manufacturing.
•Advantages: Compared to through-hole components, SMT components are smaller and can be placed on both sides of the PCB, allowing for more compact and complex circuit designs. SMT components also typically provide better performance at high frequencies.
For these components to work correctly, they must be carefully designed into the PCB layout, properly placed and soldered onto the PCB, and thoroughly tested to ensure reliable performance.
Chip Device
To create a Chip part click the 
button in The Part Builder
The part builder will automatically create the footprint for the device and also a suitable schematic symbol with the pin names left blank for you to fill in.