Uniform Distributed RC Lines (Lossy)

<< Click to Display Table of Contents >>

Navigation:  Designing a PCB with the DEX PCB Designer > Designs > Circuit Simulation > The Spice Reference Manual > Circuit Description > Circuit Elements and Models > Transmission Lines >

Uniform Distributed RC Lines (Lossy)

General form:

UXXXXXXX N1 N2 N3 MNAME L=LEN <N=LUMPS>

Examples:

U1 1 2 0 URCMOD L=50U URC2 1 12 2 UMODL l=1MIL N=6

N1 and N2 are the two element nodes the RC line connects, while N3 is the node to which the capacitances are connected. MNAME is the model name, LEN is the length of the RC line in meters. LUMPS, if specified, is the number of lumped segments to use in modeling the RC line (see the model description for the action taken if this parameter is omitted).