<< Click to Display Table of Contents >> Navigation:  Background Theory > PCB Design > What are PCB vias? > Recommended PCB Via Sizes

The recommended sizes for vias in a printed circuit board (PCB) depend on various factors, including the specific requirements of your design, the manufacturing process capabilities, and the intended application. Here are some general guidelines for via sizes:

Standard Vias

•Diameter:The typical via diameter for standard vias is in the range of 0.25 mm (10 mils) to 0.8 mm (32 mils).

•Annular Ring:The annular ring (copper pad around the hole) is usually about 0.1 mm (4 mils) to 0.15 mm (6 mils) for reliable soldering.

Microvias

•Diameter:Microvias have smaller diameters and are often less than 0.15 mm (6 mils). The exact size depends on the manufacturing capabilities and the specific requirements of the design.

•Annular Ring:Microvias may have smaller annular rings, and designers often aim for around 0.05 mm (2 mils) to 0.075 mm (3 mils).

High-Density Interconnect (HDI) Microvias

•Diameter:HDI microvias are even smaller, often in the range of 0.1 mm (4 mils) or less.

•Aspect Ratio:The aspect ratio (ratio of depth to diameter) for HDI microvias is typically higher, but it depends on the manufacturing process.

Blind Vias and Buried Vias

•For blind vias (connecting outer layers to inner layers) and buried vias (connecting inner layers), the diameter and aspect ratio depend on the specific application and manufacturing capabilities.

•Blind vias may have diameters similar to standard vias, but their depth is limited to the thickness of the outer layers.

•Buried vias can have similar characteristics to through-hole vias.

Manufacturing Considerations

•Always consult the design guidelines provided by your PCB manufacturer. Different fabrication processes may have specific limitations on the minimum and maximum via sizes.

•Laser drilling is often used for microvias, and the capabilities of the laser drilling equipment influence the achievable via sizes.

Signal Integrity and Power Considerations

•In high-speed designs, consider the impact of via sizes on signal integrity. Smaller vias may be preferred for reduced parasitic effects.

•For power distribution, ensure that the via sizes can handle the required current without excessive resistance.

Thermal Considerations

Larger vias can provide better thermal conductivity and are often preferred in high-power applications.

Design Tools

•Larger vias can provide better thermal conductivity and are often preferred in high-power applications.

•Use PCB design tools that include design rule checks (DRC) to ensure that your via sizes comply with manufacturing and reliability requirements.

Prototyping and Testing

Prototyping is crucial to validate the chosen via sizes. Perform electrical testing and consider the manufacturability and reliability of the vias.

Always work closely with your PCB manufacturer and follow their guidelines to ensure that your chosen via sizes are compatible with their fabrication processes. Additionally, consider the specific needs of your design, such as signal integrity, power requirements, and thermal considerations, when determining the appropriate via sizes.